Rivet nut
Rivet nut, round, flange head, threaded, open, A2 stainless steel
RIVETNUT A2 ROUND LARGEH.KNURL M4X9,5
Art.-no. WM0228495
EAN 6438190742174
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round grooved:
Gives better torque grip.
Suits well for thinner material thicknesses and plastics.
Flange head:
Most commonly used when the head does not have to conform to the surface
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M4 |
Length (L) | 9.5 mm |
Min./max. grip range (E) | 0.50-2.00 mm |
Head diameter (d2) | 9 mm |
Head height (K) | 1 mm |
Drill hole diameter | 6.1 mm |
Assembly force | 5600 N |
Tension force | 9100 N |
Max. tightening torque | 6.4 Nm |
Design | Open |
Material | Stainless steel A2 |
Last viewed
Taptite DIN 7500-M, countersunk head, thread rolling
CU coupler connector short
Valena Allure with Netatmo group/turn button
Selector switch Harmony
Hexagon screw, partial thread
WÜPOFAST®, blue passivated Chipboard screw
Hexagon socket screw, flat round head
Crimp sleeve WESOS
Connector KTS - GSV zinc-plated, OBO
Cable gland cable feed through, polyamide