Rivet nut
Rivet nut, round, flange head, threaded, open, A2 stainless steel
RIVETNUT A2 ROUND LARGEH.KNURL M5X13,5
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round grooved:
Gives better torque grip.
Suits well for thinner material thicknesses and plastics.
Flange head:
Most commonly used when the head does not have to conform to the surface
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
 | |
Thread type x nominal diameter | M5 |
Length | 13.5 mm |
Min./max. grip range | 3.00-4.50 mm |
Head diameter | 10 mm |
Head height | 1 mm |
Drill hole diameter | 7.1 mm |
Assembly force | 6800 N |
Tension force | 15800 N |
Max. tightening torque | 8.4 Nm |
Design | Open |
Material | Stainless steel A2 |
Last viewed
Suspension kit Linear IndiviLED
Slotted screw countersunk head DIN 963
Hexagon socket screw, cylinder head
Construction site luminaire IP65 Thorsman
ASSY® 3.0, blue passivated Chipboard screw
Panel copper Actassi
Occupancy detector PD4-S-FP Luxomat
Wallpaper protection Renova
Protective cover SK acid-resisting steel, Meka
Electronic control gear QUICKTRONIC FQ