Rivet nut
Rivet nut, round, reduced head, grooved open, A2 stainless steel
RIVETNUT A2 ROUND REDUCED HEAD M4X10
Art.-no. WM0220410
EAN 6438190742242
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round grooved:
Gives better torque grip.
Very suitable for thinner material thicknesses and plastics.
Reduced head:
Used in a sheet when what is needed is a
joint level with the surface. Separate
countersinking is not needed.
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M4 |
Length (L) | 10 mm |
Min./max. grip range (E) | 0.50-1.50 mm |
Head diameter (d2) | 6.75 mm |
Drill hole diameter | 6 mm |
Tension force | 6200 N |
Max. tightening torque | 7 Nm |
Design | Open |
Material | Stainless steel A2 |
Last viewed
Colour marker plate Exxact Actassi
Constant voltage LED driver 215V AC/ DC
Motion detector LC 200 Luxomat
Cable spiral wrap
Angled tubular cable lug, 90° Klauke
Heat shrink ring connector Durasel
Nail clip plug
Circuit board support TRDLMSP
Damp proof industrial luminaire IP65 Damp Proof Classic sensor