Rivet nut
Rivet nut, round, reduced head, grooved open, A2 stainless steel
RIVETNUT A2 ROUND REDUCED HEAD M4X10,4
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round grooved:
Gives better torque grip.
Very suitable for thinner material thicknesses and plastics.
Reduced head:
Used in a sheet when what is needed is a
joint level with the surface. Separate
countersinking is not needed.
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
 | |
Thread type x nominal diameter | M4 |
Length | 10.4 mm |
Min./max. grip range | 0.50-2.00 mm |
Head diameter | 7 mm |
Drill hole diameter | 6.1 mm |
Assembly force | 4800 N |
Tension force | 10300 N |
Max. tightening torque | 5.5 Nm |
Design | Open |
Material | Stainless steel A2 |
Last viewed
Ceiling bracket TFP3 Zinc plated, Meka
Adapter Exxact Actassi coax
Slotted screw ISO 14580
Pin for limit switch OsiSense
Downlight Pallas, IP44
Slotted screw pan head DIN 7985
Surface-mounted box corner 84mm ELKO RS Nordic
Surface-mounted outlet with lockable cover IP44 ELKO RS16
Holder CR-P ABB
Charging station Ensto One EVTL55.00 pole adapter