Rivet nut
Rivet nut, round, reduced head, grooved open, A2 stainless steel
RIVETNUT A2 ROUND REDUCED HEAD M5X11,5
Art.-no. WM0220512
EAN 6438190742266
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round grooved:
Gives better torque grip.
Very suitable for thinner material thicknesses and plastics.
Reduced head:
Used in a sheet when what is needed is a
joint level with the surface. Separate
countersinking is not needed.
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M5 |
Length (L) | 11.5 mm |
Min./max. grip range (E) | 0.50-3.00 mm |
Head diameter (d2) | 8 mm |
Drill hole diameter | 7.1 mm |
Assembly force | 7300 N |
Tension force | 14300 N |
Max. tightening torque | 8.6 Nm |
Design | Open |
Material | Stainless steel A2 |
Last viewed
Branching nipple Multifix KNH2
Washer, flat, no chamfer
Terminal block 2002 series triple-deck 2 conductor TOPJOB® S
Hexagon socket screw, cylinder head
Surface-mounted junction box AP10 IP65, plastic
Flush-mounted switch IP21 Exxact
Flush-mounted switch IP21 Exxact
Neutral bar N and PE bars with 16 mm2 pillar terminals, Ensto
Downlight Slim SQ, IP20
Signal cable FLEX-JZ