Rivet nut
Rivet nut, round, reduced head, grooved open, A2 stainless steel
RIVETNUT A2 ROUND REDUCED HEAD M6X14,5
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round grooved:
Gives better torque grip.
Very suitable for thinner material thicknesses and plastics.
Reduced head:
Used in a sheet when what is needed is a
joint level with the surface. Separate
countersinking is not needed.
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
 | |
Thread type x nominal diameter | M6 |
Length | 14.5 mm |
Min./max. grip range | 0.50-3.00 mm |
Head diameter | 10 mm |
Drill hole diameter | 9.1 mm |
Assembly force | 9600 N |
Tension force | 23700 N |
Max. tightening torque | 14.7 Nm |
Design | Open |
Material | Stainless steel A2 |
Last viewed
Power cable CU MCMK Prysmian
Cable routing conduit connector Inform
Flush-mounted outlet IP20 Jussi
Circuit breaker
Slotted screw cylinder head DIN 85
Washer, flat, no chamfer
Wall bracket VK hot dip galvanised, Meka
LED candle lamp CLASSIC B PERFORMANCE
End component P Instal
Damp proof industrial luminaire IP65 Damp Proof Classic sensor