Rivet nut
Rivet nut, round, countersunk head, open, aluminium
RIVETNUT AL ROUND COUNTERSUNK M5X13,5
Art.-no. WM0250514
EAN 6438190742327
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round:
The most common when working on a steel sheet,
with normal loads.
Countersunk head:
Used when
flush joint is needed.
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M5 |
Length (L) | 13.5 mm |
Min./max. grip range (E) | 1.50-4.00 mm |
Head diameter (d2) | 9.5 mm |
Head type | Countersunk head |
Head height (K) | 1.6 mm |
Drill hole diameter | 7.1 mm |
Assembly force | 4400 N |
Tension force | 8300 N |
Max. tightening torque | 5.5 Nm |
Design | Open |
Material | Aluminium |
Last viewed
Valena Life with Netatmo home/away wireless switch
Floodlight Floodlight PFM, IP65
Hexagon nut, low profile, fine thread
Box connector Multifix KL100
Auxiliary contactor block CC4
Circuit breaker
Tapping screw countersunk head DIN 7982-C
Hexagon nut, fine thread
Damp proof industrial luminaire Damp Proof Classic WT, IP65
Installation conductor H07V2-K MKEM 90