Rivet nut
Rivet nut, round, countersunk head, open, aluminium
RIVETNUT AL ROUND COUNTERSUNK M8X18,5
Art.-no. WM0250819
EAN 6438190708897
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round:
The most common when working on a steel sheet,
with normal loads.
Countersunk head:
Used when
flush joint is needed.
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M8 |
Length (L) | 18.5 mm |
Min./max. grip range (E) | 1.50-4.00 mm |
Head diameter (d2) | 13.5 mm |
Head type | Countersunk head |
Head height (K) | 1.6 mm |
Drill hole diameter | 11.1 mm |
Assembly force | 6000 N |
Tension force | 15400 N |
Max. tightening torque | 16.9 Nm |
Design | Open |
Material | Aluminium |
Last viewed
Cable tie anchor CTM-set, Hellermann PA, screw fastening, Black
Serrated lock washer/disk, externally serrated, type A
Thermal relay RTX3 100
Slotted screw pan head DIN 7985
Plastofast, pan head
Connection unit CCU3B, Unipro
Surface-mounted luminaire IP44 Surface Circular 250 Sensor
Hexagon socket screw, flat cylinder head
Plastofast, pan head