Rivet nut
Rivet nut, round, flange head, open, aluminium
RIVETNUT AL ROUND LARGEHEAD M6X16,5
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round:
The most common when working on a steel sheet,
with normal loads.
Flange head:
Most commonly used when the head does not have to conform to the surface
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
 | |
Thread type x nominal diameter | M6 |
Length | 16.5 mm |
Min./max. grip range | 3.00-5.50 mm |
Head diameter | 13 mm |
Head height | 1.6 mm |
Drill hole diameter | 9.1 mm |
Assembly force | 6250 N |
Tension force | 10500 N |
Max. tightening torque | 9 Nm |
Design | Open |
Material | Aluminium |
Last viewed
Wire end ferrule insulated Coiled
Cable channel PVC, cut-off groove, Legrand
Corner component KS90 acid-resisting steel, Meka
Bracket KKF acid-resisting steel, Meka
Film junction box Red Range
Taptite DIN 7500-M, countersunk head, thread rolling
Weak current cable RKUB
End component P Instal
Electronic transformer HTM
