Rivet nut
Rivet nut, countersunk head, grooved, open, steel, galvanised
RIVETNUT ZN COUNTERS,KN. M10X22,0
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round:
The most common when working on a steel sheet,
with normal loads.
Countersunk head:
Used when
flush joint is needed.
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
 | |
Thread type x nominal diameter | M10 |
Length | 22 mm |
Min./max. grip range | 1.50-4.5 mm |
Head diameter | 16 mm |
Head height | 1.5 mm |
Drill hole diameter | 13.1 mm |
Outer diameter | 12.9 mm |
Assembly force | 11000 N |
Tension force | 43300 N |
Max. tightening torque | 60 Nm |
Design | Open |
Material | Steel |
Surface | Zinc plated |
Last viewed
Miniature circuit breaker MCN 6kA Hager
Rotary dimmer Dali, flush Exxact
Heat shrink hose 2:1 FRS222
Spacer ring Multifix KKR20
Hexagon socket screw, flat cylinder head
Slotted screw cylinder head DIN 85
Tapping screw pan head DIN 7971-F
Tapping screw pan head ISO 14585-C
Slotted screw pan head DIN 7985
Terminal block 2016 series 3 conductor TOPJOB® S