Rivet nut
Rivet nut, countersunk head, grooved, open, steel, galvanised
RIVETNUT ZN COUNTERS,KN. M4X11,0
Art.-no. WM026411
EAN 6438190741610
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round:
The most common when working on a steel sheet,
with normal loads.
Countersunk head:
Used when
flush joint is needed.
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M4 |
Length (L) | 11 mm |
Min./max. grip range (E) | 1.50-3.00 mm |
Head diameter (d2) | 11 mm |
Head height (K) | 1.5 mm |
Drill hole diameter | 6.1 mm |
Outer diameter (d1) | 5.9 mm |
Assembly force | 3900 N |
Tension force | 7900 N |
Max. tightening torque | 3.3 Nm |
Design | Open |
Material | Steel |
Surface | Zinc plated |
Last viewed
Enclosed industrial luminaire Damp Proof Classic Dali, IP65
LED tube LEDVANCE T8 HF Performance 2023 600mm
Drywall box HW set 050
Surface-mounted switch IP21 Impressivo
Connector JK acid-resisting steel, Meka
Lighting rail T-component CTA3C, Unipro
Series clip VBS
Spacer sleeve
Terminal clamp TOPJOB
Downlight IP65 Ledinaire All-in CCT DIM