Rivet nut
Rivet nut, partial hexagon, small head, closed, steel, galvanised
RIVETNUT ZN HALFHEX REDH CLOS. M5X18,3
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads must be made.
Small head:
Used in a plate when what is needed is a
fastening level with the surface. Separate
countersinking is not needed.
Closed model:
Provides liquid-tight fastening and protects
against dirt and corrosion, important when the product
is painted and the threads are not protected
Datasheets(X)
 | |
Thread type x nominal diameter | M5 |
Length | 18.3 mm |
Min./max. grip range | 0.50-3.00 mm |
Head diameter | 8 mm |
Head height | 0.5 mm |
Design | Closed |
Assembly force | 4300 N |
Tension force | 9800 N |
Max. tightening torque | 6.2 Nm |
Material | Steel |
Surface | Zinc plated |
Last viewed
Downlight IP44 Optic G2 L Quick
Motor protection switch MS116
Electrical cable (MMJ/PFXP) Tele-Fonika MMJ/PFXP
Cylindrical pin, hardened
Snow melting mat Ebeco Snowmat
Spacer screw SIUL ZN
Worksite distribution panel AL IP44 Mopsi
Heat shrink hose 2:1 FRS222 box
Middle bracket RMK zinc plated, Meka
Metering panel 2T IP30 Boxer with surge protection