Rivet nut
Rivet nut, partial hexagon, small head, closed, steel, galvanised
RIVETNUT ZN HALFHEX REDH CLOS. M6X21,3
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads must be made.
Small head:
Used in a plate when what is needed is a
fastening level with the surface. Separate
countersinking is not needed.
Closed model:
Provides liquid-tight fastening and protects
against dirt and corrosion, important when the product
is painted and the threads are not protected
Datasheets(X)
 | |
Thread type x nominal diameter | M6 |
Length | 21.3 mm |
Min./max. grip range | 0.50-3.00 mm |
Head diameter | 10 mm |
Head height | 0.6 mm |
Design | Closed |
Assembly force | 7100 N |
Tension force | 19100 N |
Max. tightening torque | 12 Nm |
Material | Steel |
Surface | Zinc plated |
Last viewed
Adjustable corner component ALC3, Unipro
Wing repair washer, large outer diameter
Slotted screw pan head DIN 7985
Nail clamp SC black
Hexagon socket screw, flat cylinder head
Call push-button RWC, flush Exxact
Emergency luminaire Linespot II Lowbay, IP20
Starter pack Valena Life with Netatmo
CABLE GLAND PERFECT PERFECT, metric thread
Signal cable LIYY