Rivet nut
Rivet nut, half-hex, reduced head, open, steel, galvanised
RIVETNUT ZN HALFHEX RED.H M4X10,5
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Reduced head:
Used in a plate when what is needed is a
fastening level with the surface. Separate
countersinking is not needed.
Open model:
An effective and strong piercing nut thread without special requirements to do with the of the tightness of the fastening
Datasheets(X)
![]() | |
Thread type x nominal diameter (D) | M4 |
Length (L) | 10.5 mm |
Min./max. grip range (E) | 0.50-2.50 mm |
Head diameter (S2) | 7 mm |
Design | Open |
Assembly force | 2900 N |
Tension force | 7900 N |
Max. tightening torque | 4.6 Nm |
Material | Steel |
Surface | Zinc plated |