Rivet nut
Rivet nut, half-hex, reduced head, open, steel, galvanised
RIVETNUT ZN HALFHEX RED.H M5X11,7
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Reduced head:
Used in a plate when what is needed is a
fastening level with the surface. Separate
countersinking is not needed.
Open model:
An effective and strong piercing nut thread without special requirements to do with the of the tightness of the fastening
Datasheets(X)
 | |
Thread type x nominal diameter | M5 |
Length | 11.7 mm |
Min./max. grip range | 0.70-3.00 mm |
Head diameter | 7.8 mm |
Design | Open |
Assembly force | 3600 N |
Tension force | 9800 N |
Max. tightening torque | 6.2 Nm |
Material | Steel |
Surface | Zinc plated |
Last viewed
Slotted screw ISO 14580
Signal cable FLEX-JZ-CY
Hexagon socket screw, flat cylinder head
Through standoff WESO
Hexagon socket screw, cylinder head
Hexagon socket screw, flat cylinder head
Nylock nut, low profile, clamping piece (non-metal insert, ring)
Charging station load management control unit EVlink Home Peak Controller 3-phase
Serrated lock washer/disk, externally serrated, type A
Contactor AF96