Rivet nut
Rivet nut, half-hex, reduced head, open, steel, galvanised
RIVETNUT ZN HALFHEX RED.H M8X19,7
Art.-no. WM02108197
EAN 6438190741825
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Reduced head:
Used in a plate when what is needed is a
fastening level with the surface. Separate
countersinking is not needed.
Open model:
An effective and strong piercing nut thread without special requirements to do with the of the tightness of the fastening
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M8 |
Length (L) | 19.7 mm |
Min./max. grip range (E) | 2.50-6.50 mm |
Head diameter (S2) | 13 mm |
Hole pattern wrench size | 11 mm |
Design | Open |
Assembly force | 13000 N |
Tension force | 26000 N |
Max. tightening torque | 24 Nm |
Material | Steel |
Surface | Zinc plated |
Last viewed
Power cable CU MCMK Prysmian
Locknut, polyamide
Corner component KS45 hot dip galvanised, Meka
Hexagon socket screw, cylinder head
Lighting outlet housing AKL3
Jetty light IP67, Prima Marina FTLight
"EMERGENCY STOP" button/indicator plate Harmony
Taptite DIN 7500-M, countersunk head, thread rolling
Starter pack Valena Life with Netatmo
Slotted screw pan head DIN 7985