Rivet nut
Rivet nut, hexagon, small head, closed, steel, galvanised
RIVETNUT ZN HEX RED.H. CLOSED M8X26
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads must be made.
Small head:
Used in a plate when what is needed is a
fastening level with the surface. Separate
countersinking is not needed.
Closed model:
Provides liquid-tight fastening and protects
against dirt and corrosion, important when the product
is painted and the threads are not protected
The hexagon provides the best torque retention with large loads
Datasheets(X)
 | |
Thread type x nominal diameter | M8 |
Length | 26 mm |
Min./max. grip range | 0.50-3.00 mm |
Head diameter | 12 mm |
Head height | 0.9 mm |
Hole pattern wrench size | 11 mm |
Design | Closed |
Tension force | 25200 N |
Max. tightening torque | 24 Nm |
Material | Steel |
Surface | Zinc plated |
Last viewed
Downlight IP44 Echo M DALI
Modular luminaire Panel PFM 600 UGR PS
Flush-mounted switch 10AX – 250V IP20 Valena Life
Wall bracket VK hot dip galvanised, Meka
Work luminaire with socket IP21 Ali
Welding cable H01N2-D
Circuit board support TRBHL1
Rivet nut
Circuit board support TRMDLSP1
Fork wire terminal with short sleeve insulated PA