Rivet nut
Rivet nut, hexagon, small head, open, steel, galvanised
RIVETNUT ZN HEX. RED.HEAD M10X24,0
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads must be made.
Small head:
Used in a plate when what is needed is a
fastening level with the surface. Separate
countersinking is not needed.
Open model:
An effective and strong piercing nut thread without special requirements to do with the of the tightness of the fastening
The hexagon provides the best torque retention with large loads
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M10 |
Length (L) | 24 mm |
Min./max. grip range (E) | 3.50-6.00 mm |
Head diameter (d2) | 14 mm |
Hole pattern wrench size | 13.1 mm |
Design | Open |
Assembly force | 10500 N |
Tension force | 42500 N |
Max. tightening torque | 70 Nm |
Material | Steel |
Surface | Zinc plated |
Last viewed
Nylock nut, low profile, clamping piece (non-metal insert, ring)
Spacer screw SIUL PA
Universal terminal block OTL 1xAl/Cu 1.5-50mm²
Surface mounting frame downlight Downlight Slim DN
Locknut, brass
Vehicle protecting tube PAER
Lock washer, type B
Floodlight Floodlight PFM, IP65
Flush-mounted switch 10AX – 250V IP20 Valena Life
Downlight FTLight Luce square surface, IP44