Rivet nut
Rivet nut, hexagon, small head, open, steel, galvanised
RIVETNUT ZN HEX. RED.HEAD M4X11,0
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads must be made.
Small head:
Used in a plate when what is needed is a
fastening level with the surface. Separate
countersinking is not needed.
Open model:
An effective and strong piercing nut thread without special requirements to do with the of the tightness of the fastening
The hexagon provides the best torque retention with large loads
Datasheets(X)
 | |
Thread type x nominal diameter | M4 |
Length | 11 mm |
Min./max. grip range | 0.50-2.00 mm |
Head diameter | 6.6 mm |
Hole pattern wrench size | 6.1 mm |
Design | Open |
Assembly force | 3400 N |
Tension force | 7900 N |
Max. tightening torque | 4.1 Nm |
Material | Steel |
Surface | Zinc plated |
Last viewed
Spring pin / tube pin – grooved, for heavy use
Cable trunking, adhesive tape mounting DLP-S
Contactor AF16
Fender washer, wing repair washer
Telecom outlet RJ45 CAT6 UTP surface ELKO RS Nordic
Cable length counter H12 Vetter
Lighting rail T312B, Unipro
Centre plate solid stainless steel, Impressivo
Blind rivet domed head open
Circuit board support TRMSCBSM