Rivet nut
Rivet nut, hexagon, small head, open, steel, galvanised
RIVETNUT ZN HEX. RED.HEAD M6X16,0
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads must be made.
Small head:
Used in a plate when what is needed is a
fastening level with the surface. Separate
countersinking is not needed.
Open model:
An effective and strong piercing nut thread without special requirements to do with the of the tightness of the fastening
The hexagon provides the best torque retention with large loads
Datasheets(X)
 | |
Thread type x nominal diameter | M6 |
Length | 16 mm |
Min./max. grip range | 0.50-3.00 mm |
Head diameter | 9.8 mm |
Hole pattern wrench size | 9.1 mm |
Design | Open |
Assembly force | 7500 N |
Tension force | 19100 N |
Max. tightening torque | 12 Nm |
Material | Steel |
Surface | Zinc plated |
Last viewed
Pipe end cap plastic
Motion detector, flush IP44 Kosti
Cover plate 85 mm Valena Life
Surface-mounted skirting box 41/85 IP20 Impressivo
Charging station base EVlink Pro AC base 2 devices
Pipe clip VBS 2955 OBO
Defrosting cable Ebeco Frostvakt 10
Wall bracket Defem B4 A4, Wibe
Auxiliary contactor MPCB MPX3 front installation
ENLARGER MS PG/PG Brass nickel plated