Rivet nut
Rivet nut, hexagon, small head, open, steel, galvanised
RIVETNUT ZN HEX. RED.HEAD M8X18,0
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads must be made.
Small head:
Used in a plate when what is needed is a
fastening level with the surface. Separate
countersinking is not needed.
Open model:
An effective and strong piercing nut thread without special requirements to do with the of the tightness of the fastening
The hexagon provides the best torque retention with large loads
Datasheets(X)
 | |
Thread type x nominal diameter | M8 |
Length | 18 mm |
Min./max. grip range | 0.50-3.00 mm |
Head diameter | 12 mm |
Hole pattern wrench size | 11 mm |
Design | Open |
Tension force | 25200 N |
Max. tightening torque | 24 Nm |
Material | Steel |
Surface | Zinc plated |
Last viewed
Hexagon socket screw, flat round head
Controller Harmony
Motor protection switch MS116
Mounting plate DP-GT Zinc plated, Meka
Surface-mounted outlet IP44 Impressivo
Hexagonal bolt, full thread
Contactor CTX3 100
Downlight FTLight Luce square surface, IP44
Wire shelf WMT Acid-resisting steel, Meka
Cable-in conduit Aalto 20HF 2CAT6 UTP-COAX