Rivet nut
Rivet nut, hexagon, flange head, open, steel, galvanised
RIVETNUT ZN HEX.LARGEH. M10X20
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads must be made.
Flange head:
Most commonly used when the head does not have to conform to the surface
Open model:
An effective and strong piercing nut thread without special requirements to do with the of the tightness of the fastening
The hexagon provides the best torque retention with large loads
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M10 |
Length (L) | 20 mm |
Min./max. grip range (E) | 0.50-3.00 mm |
Head diameter (d2) | 18 mm |
Head height (K) | 1.7 mm |
Hole pattern wrench size | 12.1 mm |
Design | Open |
Max. tightening torque | 40 Nm |
Material | Steel |
Surface | Zinc plated |
Last viewed
Downlight Slim Style, IP44
Circuit board support TRRLCBSR
Cover plate 87 mm with adapter Exxact
Ceiling bracket QCB, Unipro
ENLARGER PA PG/PG Polyamide
Defrosting cable Frostvakt 25
Enclosed industrial luminaire Damp Proof Classic Dali, IP65
Motor protection switch TeSys GV2ME
Lock washer, type B
Hexagon socket screw, cylinder head