Rivet nut
Rivet nut, hexagon, flange head, open, steel, galvanised
RIVETNUT ZN HEX.LARGEH. M4X10,0
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads must be made.
Flange head:
Most commonly used when the head does not have to conform to the surface
Open model:
An effective and strong piercing nut thread without special requirements to do with the of the tightness of the fastening
The hexagon provides the best torque retention with large loads
Datasheets(X)
 | |
Thread type x nominal diameter | M4 |
Length | 10 mm |
Min./max. grip range | 0.50-2.00 mm |
Head diameter | 9 mm |
Head height | 1 mm |
Hole pattern wrench size | 6.1 mm |
Design | Open |
Assembly force | 3400 N |
Tension force | 7900 N |
Max. tightening torque | 4.8 Nm |
Material | Steel |
Surface | Zinc plated |
Last viewed
Molded case circuit breaker DPX 160
Defrosting cable Ebeco Frostvakt 10
Snow melting mat Ebeco Snowmat
Group switchgear door Näpsä
LED profile corner Premium FT
Hexagon socket screw, flat cylinder head
Circuit breaker
Equipotential bonding busbar housing PMR576
Terminal block triple-deck 2002 series 2 conductor KEVI TOPJOB® S