Rivet nut
Rivet nut, hexagon, flange head, open, steel, galvanised
RIVETNUT ZN HEX.LARGEH. M5X13,0
Art.-no. WM027513
EAN 6438190741641
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads must be made.
Flange head:
Most commonly used when the head does not have to conform to the surface
Open model:
An effective and strong piercing nut thread without special requirements to do with the of the tightness of the fastening
The hexagon provides the best torque retention with large loads
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M5 |
Length (L) | 13 mm |
Min./max. grip range (E) | 0.50-3.00 mm |
Head diameter (d2) | 10 mm |
Head height (K) | 1 mm |
Hole pattern wrench size | 7.1 mm |
Design | Open |
Assembly force | 4900 N |
Tension force | 9800 N |
Max. tightening torque | 6.5 Nm |
Material | Steel |
Surface | Zinc plated |
Last viewed
Flush-mounted switch IP21 Exxact
Serrated lock washer, flush-mounted, type V
Signal cable FLEX-JZ-CY
Flange bolt, hexagon head
Rivet nut
Hexagon socket screw, flat round head
Energy transfer chain cable PUR JZ, Halogen-free
Short-circuit bridge TOPJOB® S 2007 series
Terminal block 2001 series 3 conductor GNYE TOPJOB® S