Rivet nut
Rivet nut, hexagon, flange head, open, steel, galvanised
RIVETNUT ZN HEX.LARGEH. M6X14,2
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads must be made.
Flange head:
Most commonly used when the head does not have to conform to the surface
Open model:
An effective and strong piercing nut thread without special requirements to do with the of the tightness of the fastening
The hexagon provides the best torque retention with large loads
Datasheets(X)
 | |
Thread type x nominal diameter | M6 |
Length | 14.2 mm |
Min./max. grip range | 0.50-3.00 mm |
Head diameter | 13 mm |
Head height | 1.5 mm |
Hole pattern wrench size | 9.1 mm |
Design | Open |
Assembly force | 7100 N |
Tension force | 22000 N |
Max. tightening torque | 22 Nm |
Material | Steel |
Surface | Zinc plated |
Last viewed
Feather key, high profile
Cable tie narrow natural TRWS - A
Motor protection switch MPX3 32H
Lighting rail T-component CTA3C, Unipro
Flush-mounted switch 10AX – 250V IP20 Valena Life
Tubular cable lug BR Klauke
Cable trunking, Forix adapter For Forix accessory
Serrated lock washer/disk, externally serrated, type A
Apparatus box with strain relief and plaster cover Multifix
Surface-mounted junction box AP9 IP65, plastic