Rivet nut
Rivet nut, round, flange head, closed, steel, galvanised
RIVETNUT ZN ROUND LARGEH CLOS M3X14,5
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round:
The most common when working on a steel sheet,
with normal loads.
Flange head:
Most commonly used when the head does not have to conform to the surface
Closed model:
Provides liquid-tight fastening and protects
against dirt and corrosion, important when the product
is painted and the threads are not protected
Datasheets(X)
 | |
Thread type x nominal diameter | M3 |
Length | 14.5 mm |
Min./max. grip range | 0.30-1.80 mm |
Head diameter | 7 mm |
Head height | 0.8 mm |
Drill hole diameter | 5 mm |
Tension force | 4300 N |
Max. tightening torque | 1 Nm |
Design | Closed |
Material | Steel |
Surface | Zinc plated |
Last viewed
Cable entry flange HTC
Panel luminaire Panel Comfort PFM 600 DALIVR UGR
Surface-mounted luminaire Giotto IP44 305 LED
Centre plate antenna Exxact
Contactor CTX3 22
Car conductor AJ numbered
Plastic rivet black TRSR
Plastofast, pan head
Corner component KS90 hot dip galvanised, Meka
Rotary dimmer 1-10 V UPK, flush Exxact