Rivet nut
Rivet nut, round, flange head, closed, steel, galvanised
RIVETNUT ZN ROUND LARGEH CLOS M5X18
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Suitable for material thicknesses of 0.25 – 10.5 mm.
Round:
The most common when working on a steel sheet,
with normal loads.
Flange head:
Most commonly used when the head does not have to conform to the surface
Closed model:
Provides liquid-tight fastening and protects
against dirt and corrosion, important when the product
is painted and the threads are not protected
Datasheets(X)
 | |
Thread type x nominal diameter | M5 |
Length | 18 mm |
Min./max. grip range | 0.50-3.00 mm |
Head diameter | 10 mm |
Head height | 1.2 mm |
Drill hole diameter | 7 mm |
Tension force | 11450 N |
Max. tightening torque | 7 Nm |
Design | Closed |
Material | Steel |
Surface | Zinc plated |
