Rivet nut
Rivet nut, round, flange head, closed, steel, galvanised
RIVETNUT ZN ROUND LARGEH CLOS M8X25,5
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round:
The most common when working on a steel sheet,
with normal loads.
Flange head:
Most commonly used when the head does not have to conform to the surface
Closed model:
Provides liquid-tight fastening and protects
against dirt and corrosion, important when the product
is painted and the threads are not protected
Datasheets(X)
 | |
Thread type x nominal diameter | M8 |
Length | 25.5 mm |
Min./max. grip range | 0.80-3.50 mm |
Head diameter | 15 mm |
Head height | 1.5 mm |
Drill hole diameter | 11 mm |
Tension force | 24200 N |
Max. tightening torque | 24 Nm |
Design | Closed |
Material | Steel |
Surface | Zinc plated |
Last viewed
Threaded insert metric ISO standard thread
Wire marker roll 2.5 to 16 mm2 Helagrip HGDC
Terminal block 2106 series with lever 3 conductor GNYE TOPJOB® S
Screw set RS 4 HDG Hot dip galvanised, Meka
Final circuit board flush IP20C Näpsä
Connector WMT CL stainless steel A4, Meka
Downlight IP65 Spot Fire Rated
Wall luminaire IP44, Endura beam Down
Wiser motion detector, ceiling Zigbee