Rivet nut
Rivet nut, round, flange head, open, steel, galvanised
RIVETNUT ZN ROUND LARGEHEAD M10X17,5
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round:
The most common when working on a steel sheet,
with normal loads.
Flange head:
Most commonly used when the head does not have to conform to the surface
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M10 |
Length (L) | 17.5 mm |
Min./max. grip range (E) | 1.00-3.50 mm |
Head diameter (d2) | 16 mm |
Head height (K) | 1.6 mm |
Drill hole diameter | 12.1 mm |
Assembly force | 1200 N |
Tension force | 34000 N |
Max. tightening torque | 30 Nm |
Design | Open |
Material | Steel |
Surface | Zinc plated |
Last viewed
Hexagon socket screw, cylinder head
Motor protection switch TeSys GV2ME
Group switchgear door Näpsä
Motion detector, flush IP44 Kosti
Cover plate 85 mm Impressivo
Terminal block 2002 series double-deck 2 conductor GNYE TOPJOB® S
EMC LOCKNUT MS PG EMC, brass nickel plated
Plastofast, pan head
Cable trunking, Forix adapter For Forix accessory