Rivet nut
Rivet nut, round, flange head, open, steel, galvanised
RIVETNUT ZN ROUND LARGEHEAD M4X9,5
Art.-no. WM022495
EAN 6438190741429
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round:
The most common when working on a steel sheet,
with normal loads.
Flange head:
Most commonly used when the head does not have to conform to the surface
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M4 |
Length (L) | 9.5 mm |
Min./max. grip range (E) | 0.50-2.00 mm |
Head diameter (d2) | 9 mm |
Head height (K) | 1 mm |
Drill hole diameter | 6.1 mm |
Assembly force | 4400 N |
Tension force | 8900 N |
Max. tightening torque | 4 Nm |
Design | Open |
Material | Steel |
Surface | Zinc plated |
Last viewed
Hexagon screw, full thread
Floodlight IP67 Spot It
Surface-mounted junction box AP9 IP65, plastic
Flush-mounted switch 10AX – 250V IP20 Valena Life
Power source Transformer, Wago
Flange bolt, hexagon head, lock toothing
Floor heating foil Ebeco Foil 48V
Hexagon socket screw, flat round head
Motor protection switch MS116