Rivet nut
Rivet nut, round, flange head, open, steel, galvanised
RIVETNUT ZN ROUND LARGEHEAD M8X22,5
Art.-no. WM0228225
EAN 6438190741467
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round:
The most common when working on a steel sheet,
with normal loads.
Flange head:
Most commonly used when the head does not have to conform to the surface
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M8 |
Length (L) | 22.5 mm |
Min./max. grip range (E) | 5.50-8.00 mm |
Head diameter (d2) | 16 mm |
Head height (K) | 1.5 mm |
Drill hole diameter | 11.1 mm |
Assembly force | 8350 N |
Tension force | 29800 N |
Max. tightening torque | 23 Nm |
Design | Open |
Material | Steel |
Surface | Zinc plated |
Last viewed
Installation cable MMJ
Nail clamp SC black
Cable routing conduit aluminium, Instal
Enclosed industrial luminaire Damp Proof Slim Value, IP65
Spacer screw SIUL MSNI
Tensioning disk, tension washer with screw connections
Circuit breaker
Serrated lock washer/disk, externally serrated, type A
Ceiling/wall light Outdoor Led Surface Square, IP54
Slotted screw pan head DIN 7985