Rivet nut
Rivet nut, round, flange head, grooved, open, steel, galvanised
RIVETNUT ZN ROUND LARGEH.KNUR. M12X25,0
Art.-no. WM0211225
EAN 6438190741405
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round grooved:
Gives better torque grip.
Suits well for thinner material thicknesses and plastics.
Flange head:
Most commonly used when the head does not have to conform to the surface
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M12 |
Length (L) | 25 mm |
Min./max. grip range (E) | 1.00-4.00 mm |
Head diameter (d2) | 23 mm |
Head height (K) | 2 mm |
Drill hole diameter | 16.1 mm |
Assembly force | 14700 N |
Tension force | 47700 N |
Max. tightening torque | 161.5 Nm |
Design | Open |
Material | Steel |
Surface | Zinc plated |
Last viewed
Cylindrical pin, hardened
Motor protection switch MS116
Conduit outlet IP20 earthed, ProDuct, ABB
Flush-mounted outlet IP20 Valena
Flange bolt, hexagon head
Cable trunking, flat angle DLP-S
Flush-mounted outlet diagonal IP21 Exxact
Slotted screw cylinder head DIN 84
Hexagon socket screw, flat round head