Rivet nut
Rivet nut, round, flange head, grooved, open, steel, galvanised
RIVETNUT ZN ROUND LARGEH.KNUR. M3X10,5
Art.-no. WM0213105
EAN 6438190796283
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
Rivet nut, round, flange head, grooved, open, steel, galvanised
Simple and ideal when the place of use is
a thin material where threads are needed.
Round grooved:
Gives better torque grip.
Suits well for thinner material thicknesses and plastics.
Flange head:
Most commonly used when the head does not have to conform to the surface
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Product information
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M3 |
Length (L) | 10.5 mm |
Min./max. grip range (E) | 0.25-2.50 mm |
Head diameter (d2) | 8 mm |
Head height (K) | 1 mm |
Drill hole diameter | 5.1 mm |
Assembly force | 2400 N |
Tension force | 4100 N |
Max. tightening torque | 2.2 Nm |
Design | Open |
Material | Steel |
Surface | Zinc plated |
