Rivet nut
Rivet nut, round, flange head, grooved, open, steel, galvanised
RIVETNUT ZN ROUND LARGEH.KNUR. M4X11
Art.-no. WM021411
EAN 6438190741306
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round grooved:
Gives better torque grip.
Suits well for thinner material thicknesses and plastics.
Flange head:
Most commonly used when the head does not have to conform to the surface
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M4 |
Length (L) | 11 mm |
Min./max. grip range (E) | 0.30-2.00 mm |
Head diameter (d2) | 9 mm |
Head height (K) | 1 mm |
Drill hole diameter | 6 mm |
Tension force | 7300 N |
Max. tightening torque | 4 Nm |
Design | Open |
Material | Steel |
Surface | Zinc plated |
Last viewed
Spotlight Tracklight Spot
Lighting rail cover CS3, Unipro
Flush-mounted outlet diagonal IP21 Exxact
Contactor AF09
Blind rivet domed head closed
Contactor AF12
Wire end ferrule Insulated For one conductor
Nylock nut, low profile, clamping piece (non-metal insert, ring)
Surface-mounted skirting box for Exxact angled double outlets 47/85 Exxact
Ceiling bracket TP2 acid-resisting steel, Meka