Rivet nut
Rivet nut, round, flange head, grooved, open, steel, galvanised
RIVETNUT ZN ROUND LARGEH.KNUR. M4X9,5
Art.-no. WM021495
EAN 6438190741290
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round grooved:
Gives better torque grip.
Suits well for thinner material thicknesses and plastics.
Flange head:
Most commonly used when the head does not have to conform to the surface
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
![]() | |
Thread type x nominal diameter (D) | M4 |
Length (L) | 9.5 mm |
Min./max. grip range (E) | 0.50-2.00 mm |
Head diameter (d2) | 9 mm |
Head height (K) | 1 mm |
Drill hole diameter | 6.1 mm |
Assembly force | 3900 N |
Tension force | 7900 N |
Max. tightening torque | 4.5 Nm |
Design | Open |
Material | Steel |
Surface | Zinc plated |