Rivet nut
RIVETNUT ZN ROUND LARGEH.KNUR. M5X13
Art.-no. WM021513
EAN 6438190725573
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round grooved:
Gives better torque grip.
Suits well for thinner material thicknesses and plastics.
Flange head:
Most commonly used when the head does not have to conform to the surface
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M5 |
Min./max. grip range (E) | 0.50-3.00 mm |
Head diameter (d2) | 10 mm |
Head height (K) | 1 mm |
Drill hole diameter | 7 mm |
Tension force | 11450 N |
Max. tightening torque | 7 Nm |
Design | Open |
Material | Steel |
Surface | Zinc plated |
Last viewed
Machine screw countersunk head DIN 963
Slotted screw pan head DIN 7985
Cylindrical pin, unhardened Rounded ends
Cylindrical pin, hardened
Underfloor heating sensor Exxact
Cable tie with stand natural TRSHK-M
Hexagon screw, partial thread
Motor protection switch MS132
Hexagon socket screw, cylinder head