Rivet nut
Rivet nut, round, flange head, grooved, open, steel, galvanised
RIVETNUT ZN ROUND LARGEH.KNUR. M6X16,5
Art.-no. WM0216165
EAN 6438190741351
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round grooved:
Gives better torque grip.
Suits well for thinner material thicknesses and plastics.
Flange head:
Most commonly used when the head does not have to conform to the surface
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M6 |
Length (L) | 16.5 mm |
Min./max. grip range (E) | 3.00-5.50 mm |
Head diameter (d2) | 13 mm |
Head height (K) | 1.5 mm |
Drill hole diameter | 9.1 mm |
Assembly force | 6500 N |
Tension force | 20600 N |
Max. tightening torque | 17.8 Nm |
Design | Open |
Surface | Zinc plated |
Last viewed
Enclosed industrial luminaire Damp Proof Slim Value, IP65
Disconnect/test terminal block 2007 series TOPJOB® S
Terminal block 2002 series triple-deck 2 conductor TOPJOB® S
CABLE MARKER STRIP 0.5-1.5 MM2
Spacer screw SIUL ZN
Spacer sleeve
Cable trunking, coupling DLP-S
Apparatus box with strain relief and plaster cover Multifix
Open industrial luminaire IP23 Low Bay FLEX
Wire end ferrule Insulated For one conductor