Rivet nut
Rivet nut, round, flange head, grooved, open, steel, galvanised
RIVETNUT ZN ROUND LARGEH.KNUR. M8X16,5
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Suitable for material thicknesses of 0.25 – 10.5 mm.
Round grooved:
Gives better torque grip.
Very suitable for thinner material thicknesses and plastics.
Flange head:
Most commonly used when the head does not have to conform to the surface
Open model:
An effective and strong piercing nut thread without special requirements to do with the of the tightness of the fastening
Datasheets(X)
 | |
Thread type x nominal diameter | M8 |
Length | 16.5 mm |
Min./max. grip range | 0.50-3.00 mm |
Head diameter | 16 mm |
Head height | 1.5 mm |
Drill hole diameter | 11.1 mm |
Assembly force | 8400 N |
Tension force | 29800 N |
Max. tightening torque | 34.5 Nm |
Design | Open |
Surface | Zinc plated |
Last viewed
Suspended luminaire Panel 1200 Direct/Indirect
Lock washer for cylinder head screws
Adapter 1-pt/2-pt Impressivo
Nylock nut, low profile, clamping piece (non-metal insert, ring)
Flush-mounted schuko outlet IP20 Valena
Compressed crimp cable lug
Lighting rail TC32F, Unipro
Mounting/insulation plate Ebisol
Cable routing conduit aluminium, Instal
Hexagon screw, full thread