Rivet nut
Rivet nut, round, flange head, grooved, open, steel, galvanised
RIVETNUT ZN ROUND LARGEH.KNUR.M6X14,5
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round grooved:
Gives better torque grip.
Suits well for thinner material thicknesses and plastics.
Flange head:
Most commonly used when the head does not have to conform to the surface
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
 | |
Thread type x nominal diameter | M6 |
Length | 14.5 mm |
Min./max. grip range | 0.50-3.00 mm |
Head diameter | 12 mm |
Head height | 1.5 mm |
Drill hole diameter | 9 mm |
Tension force | 16900 N |
Max. tightening torque | 14 Nm |
Design | Open |
Material | Steel |
Surface | Zinc plated |
Last viewed
Cable gland T-VET PG
Installation conductor H07V2-K MKEM 90
Cover plate 83mm Renova
Adhesive pad
Conduit TAM HF Pull cord
Hexagon socket screw, cylinder head
STOP PLUG MS PG, with O ring Brass nickel plated
Downlight FTLight Luce round surface, IP44
Saddle terminal KN Ensto
Flush-mounted outlet with cover plate IP21 Exxact