Rivet nut
Rivet nut, round, reduced head, open, steel, galvanised
RIVETNUT ZN ROUND RED.H. M5X11,5
Art.-no. WM0255115
EAN 6438190741597
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round:
The most common when working on a steel sheet,
with normal loads.
Reduced head:
Used in a sheet when what is needed is a
joint level with the surface. Separate
countersinking is not needed.
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M5 |
Length (L) | 11.5 mm |
Min./max. grip range (E) | 0.50-3.00 mm |
Head diameter (d2) | 7.9 mm |
Drill hole diameter | 7.2 mm |
Assembly force | 5300 N |
Tension force | 9800 N |
Max. tightening torque | 5.7 Nm |
Design | Open |
Material | Steel |
Surface | Zinc plated |
Last viewed
Ceiling bracket TP2-P hot dip galvanised, Meka
Occupancy detector PD4N-M-DACO Luxomat
Apparatus box with strain relief and plaster cover Multifix
Drywall box HW set 050
BHS series connection adapter
Hexagon socket screw, flat round head
Flush-mounted switch 10AX – 250V IP20 Valena Life
Surface-mounted luminaire IP65 Surface Bulk Head with motion detector
Wire marker roll 2.5 to 16.0 mm2 PA PA series
Corner component Instal