Rivet nut
Rivet nut, round, reduced head, grooved, steel, galvanised
RIVETNUT ZN ROUND RED.H.CLOS.KN,M6X21,5
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round grooved:
Gives better torque grip.
Very suitable for thinner material thicknesses and plastics.
Reduced head:
Used in a sheet when what is needed is a
joint level with the surface. Separate
countersinking is not needed.
Closed model:
Provides liquid-tight fastening and protects
against dirt and corrosion, important when the product
is painted and the threads are not protected
Datasheets(X)
 | |
Thread type x nominal diameter | M6 |
Length | 21.5 mm |
Head diameter | 9.9 mm |
Head height | 0.5 mm |
Drill hole diameter | 9.1 mm |
Assembly force | 7100 N |
Tension force | 19100 N |
Max. tightening torque | 10.5 Nm |
Design | Closed |
Material | Steel |
Surface | Zinc plated |
Last viewed
Slotted cable trunking with cut-off groove Trancab
Valena Life with Netatmo awake/sleep switch
RUBBER SEAL PG Perforated
Lighting rail adapter A90C, Unipro
Wire shelf WMT EG Electro deposited, Meka
Hexagon socket screw, flat round head
Floor plug, hexagon plug, taper thread, inches size
Cable protector Instal
Hexagon socket screw, cylinder head
Flush-mounted outlet IP44 Exxact