Rivet nut
Rivet nut, round, reduced head, grooved, steel, galvanised
RIVETNUT ZN ROUND RED.H.CLOS.KN.M8X22,5
Art.-no. WM0248225
EAN 6438190741481
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round grooved:
Gives better torque grip.
Very suitable for thinner material thicknesses and plastics.
Reduced head:
Used in a sheet when what is needed is a
joint level with the surface. Separate
countersinking is not needed.
Closed model:
Provides liquid-tight fastening and protects
against dirt and corrosion, important when the product
is painted and the threads are not protected
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M8 |
Length (L) | 22.5 mm |
Head diameter (d2) | 12 mm |
Head height (K) | 0.5 mm |
Drill hole diameter | 11.1 mm |
Assembly force | 8400 N |
Tension force | 30000 N |
Max. tightening torque | 15.5 Nm |
Design | Closed |
Material | Steel |
Surface | Zinc plated |
Last viewed
Lighting rail TC32F, Unipro
Washer for cylinder head screws
Cable trunking, screw mounting, WDK
Terminal block 2106 series with lever 2 conductor TOPJOB® S
Hexagon socket screw, cylinder head
Surface-mounted luminaire IP65 Surface Bulk Head with motion detector
Hexagon screw, full thread
Plastic enclosure TG PC
Blind rivet domed head open