Rivet nut
Rivet nut, round, reduced head, grooved, open, steel, galvanised
RIVETNUT ZN ROUND RED.H.KN. M10X23,5
Art.-no. WM02410235
EAN 6438190709139
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round grooved:
Gives better torque grip.
Very suitable for thinner material thicknesses and plastics.
Reduced head:
Used in a sheet when what is needed is a
joint level with the surface. Separate
countersinking is not needed.
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M10 |
Length (L) | 23.5 mm |
Min./max. grip range (E) | 3.00-5.50 mm |
Head diameter (d2) | 14 mm |
Drill hole diameter | 13.1 mm |
Assembly force | 11000 N |
Tension force | 43300 N |
Max. tightening torque | 60 Nm |
Design | Open |
Material | Steel |
Surface | Zinc plated |
Last viewed
Intermediate support KSF-VT acid-resisting steel, Meka
Residual current device outlet, surface IP44, Exxact
Defrosting cable Ebeco Frostvakt 10
Installation conductor H05V2-K MKJ 90
Flush-mounted switch
Optical smoke alarm SA701, Housegard Pebble 10
LED mini ball lamp CLASSIC P PERFORMANCE
Wire shelf WMT Acid-resisting steel, Meka
Plastofast, countersunk head
EMC LOCKNUT MS PG EMC, brass nickel plated