Rivet nut
Rivet nut, round, reduced head, grooved, open, steel, galvanised
RIVETNUT ZN ROUND RED.H.KN. M12X24,2
Art.-no. WM02412242
EAN 6438190741573
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round grooved:
Gives better torque grip.
Very suitable for thinner material thicknesses and plastics.
Reduced head:
Used in a sheet when what is needed is a
joint level with the surface. Separate
countersinking is not needed.
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M12 |
Length (L) | 24.2 mm |
Min./max. grip range (E) | 1.00-4.00 mm |
Head diameter (d2) | 17 mm |
Drill hole diameter | 16.1 mm |
Assembly force | 14700 N |
Tension force | 47700 N |
Max. tightening torque | 161.5 Nm |
Design | Open |
Material | Steel |
Surface | Zinc plated |
