Rivet nut
Rivet nut, round, reduced head, grooved, open, steel, galvanised
RIVETNUT ZN ROUND RED.H.KN. M5X13,5
Art.-no. WM0245135
EAN 6438190741528
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round grooved:
Gives better torque grip.
Very suitable for thinner material thicknesses and plastics.
Reduced head:
Used in a sheet when what is needed is a
joint level with the surface. Separate
countersinking is not needed.
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Product information
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M5 |
Length (L) | 13.5 mm |
Min./max. grip range (E) | 2.00-3.50 mm |
Head diameter (d2) | 8 mm |
Drill hole diameter | 7 mm |
Tension force | 11450 N |
Max. tightening torque | 7 Nm |
Design | Open |
Material | Steel |
Surface | Zinc plated |
