Rivet nut
Rivet nut, round, flange head, open, steel, galvanised
RIVETNUT ZP ROUND LARGEHEAD M12X30
With registration you can access the Würth Elektro online shop selection.
Simple and ideal when the place of use is
a thin material where threads are needed.
Round:
The most common when working on a steel sheet,
with normal loads.
Flange head:
Most commonly used when the head does not have to conform to the surface
Open model:
An effective and strong piercing nut thread without special requirements on the tightness of the joint
Datasheets(X)
 | |
Thread type x nominal diameter | M12 |
Length | 30 mm |
Min./max. grip range | 4.00-7.00 mm |
Head height | 2 mm |
Tension force | 47500 N |
Max. tightening torque | 76 Nm |
Design | Open |
Material | Steel |
Surface | Zinc plated |
Last viewed
Terminal block 2102 series with lever 2 conductor GNYE TOPJOB® S
Connection unit CCU3A, Unipro
Illuminated selector switch Harmony
Spacer screw SIUL PA
Main switch SH040 3-pole
Residual current device TX3
Surface mounting frame downlight Downlight Slim DN
Power source CP-E
Hexagon screw, countersunk head, zinc plated
Mounting plate KRC zinc plated, Meka