Safety switch OTE
SAFETY SWITCH EMC 7,5 KW 3-POLE OTE16T3M
ABB
With registration you can access the Würth Elektro online shop selection.
Use the enclosed switches to create a safe working environment and reduce the risk of electrical and mechanical accidents. We offer side and front controlled safety switches from 16 amperes to 1,200 amperes (IEC) with a power range of 7.5–1,200 kW up to 690 V (AC-23A). The housings are made from plastic, steel, A4 stainless steel and aluminium.
Datasheets(X)
Version as main switch | Yes |
Version as maintenance-/service switch | Yes |
Version as safety switch | Yes |
Version as emergency stop installation | No |
Version as reversing switch | No |
Number of switches | 1 |
Max. rated operation voltage Ue AC | 750 V |
Rated operating voltage | 750-750 V |
Rated permanent current Iu | 40 A |
Rated permanent current at AC-23, 400 V | 16 A |
Rated permanent current at AC-21, 400 V | 32 A |
Rated operation power at AC-23, 400 V | 7.5 kW |
Switching power at 400 V | 7.5 kW |
Number of poles | 3 |
Number of auxiliary contacts as normally closed contact | 0 |
Number of auxiliary contacts as normally open contact | 0 |
Number of auxiliary contacts as change-over contact | 0 |
Motor drive optional | No |
Motor drive integrated | No |
Voltage release optional | No |
Device construction | Complete device in housing |
Suitable for floor mounting | No |
Suitable for front mounting 4-hole | Yes |
Suitable for front mounting centre | No |
Suitable for distribution board installation | No |
Colour control element | Black |
Type of control element | Turn button |
Interlockable | No |
Degree of protection (IP), front side | IP65 |
Last viewed
Cable tie anchor CTM-set, Hellermann PA, screw fastening, Black
Hexagon socket screw, flat round head
Ceiling bracket TP2 acid-resisting steel, Meka
Auxiliary contact CA4
Spiral binding, cable protector, standard
Circuit board support TRDLMSP
Shim
Motor protection switch MPX3 32H
Circuit breaker
Screw set RS MEK J 10 Electro galvanized, Meka