Hexagon screw, countersunk head
ISO 10642, stainless steel A4-070, plain
SCR-CS-ISO10642-A4/070-IH6-M10X20
With registration you can access the Würth Elektro online shop selection.
- Due to their head geometry, countersunk head screws have a limited load capacity according to this standard and possibly do not meet tensile or torsional strength requirements.
- The mechanical properties of the screw are the same and meet the requirements of ISO 3506-1
- Depending on the length of the screw, these items are provided with a thread that comes near the head
- Countersinks for screw heads in accordance with DIN 7991 and ISO 10642 must comply with DIN 74 shape F
DIN 7991 has been withdrawn and replaced by ISO 10642. ISO 10642 replaces DIN 7991 | There are some limited consistencies (some screw head heights and diameters have been amended | the M18, M22, and M24 nominal diameters have been removed | stainless steel models have been removed | property classes 10.9 and 12.9 have been added).
Due to their head geometry, these screws can only be subjected to limited loads; see DIN EN ISO 3506-1
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M10 |
Length (l) | 20 mm |
Head diameter (d) | 20.69 mm |
Head height (k) | 6.2 mm |
Standards | ISO 10642 |
Material | Stainless steel A4 |
Property class | 070 |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Countersunk head |
Drive type | Hexagon socket |
Internal drive | HS6 |
Thread type | Metric thread |
Pitch | 1.5 mm |
Thread form | Standard metric thread |
Thread design | Full thread |
Last viewed
Set screw, hex socket
Nail clamp SC black
Surface-mounted junction box AP9 IP65, plastic
Cable channel PVC, cut-off groove, Legrand
Locknut, polyamide
Cable tie lockable natural TRLWS 2A
Luminaire housing IP65 Damp Proof Housing
Terminal block 2002 series 3-conductor TOPJOB® S
Cable tie lockable natural TRLWS 2A
Hexagon socket screw, cylinder head