Rotary dimmer SDM100LED, flush Exxact
SDM100LED RCL
SCHNEIDER ELECTRIC
With registration you can access the Würth Elektro online shop selection.
You can add Exxact Dimmer Module SDM100LED to an existing 6-connection to adjust the lights at both ends of the hallway by adding only one dimmer.
Flush-mounted dimmer for LED lights
- Universal dimmer for LED lights and luminaires suitable for phase-cutting adjustment.
- Also suitable for bulbs, 230 V halogen bulbs and small-voltage halogen bulbs with an electronic or iron-core transformer.
- Default RC. If you are not satisfied with the default mode result, switch to the RL LED mode.
- In default mode, the max. LED power is 100 W. In RL LED mode, the max. power is 20 W.
- Adjustable minimum and maximum level.
- Installed behind the apparatus box lever switch.• ON/OFF control and lighting level adjustment possible from several locations with one dimmer.
Datasheets(X)
Assembly arrangement | Basic element with complete housing |
Method of operation | Push button |
App control via Bluetooth | No |
Dimming phase cut-on | Yes |
Dimming phase cut-off | Yes |
Serial dimmer | No |
Type of load | Universal and LED Retrofit |
Substation input | Yes |
Light value memory | Yes |
Applicable with button | Yes |
Applicable with movement sensor | No |
Applicable with presence indicator | No |
Applicable with time switch/timer | No |
Applicable with transmission button | No |
Applicable with infrared button | No |
Type of fastening | Other |
Material | Other |
Material quality | Other |
Halogen free | Yes |
Surface protection | Untreated |
Colour | Grey |
Transparent | No |
Suitable for degree of protection (IP) | IP20 |
Nominal voltage | 230-230 V |
Frequency | 50-50 Hz |
Connection type | Screwed terminal |
Core cross section | 2.5-2.5 mm² |
Device width | 40 mm |
Device height | 45 mm |
Device depth | 20 mm |
Min. depth of built-in installation box | 66 mm |
E-number Finland | 2609111 |
Brand | SCHNEIDER ELECTRIC |
