Welcome to Würth Elektro For trade customers only

Self-fusing shrink adhesive tape

Enables different materials to be sealed in a way that is waterproof and impermeable to water vapour. Suitable for use in various fields, such as the automotive and electrical industries.


SEALTPE-WELD-19X10M

Art.-no. 09850771
EAN 4011231916868

-
Self-fusing shrink adhesive tape

Art.-no. 09850771

-
Quantity
PU
x 1

Show availability at another Center
Exclusively for trade customers

With registration you can access the Würth Elektro online shop selection.

High dielectric strength



The tape is ideal for insulating cables and electrical lines.



Highly compatible with PE, PVC, butyl, neoprene etc.



Can be used in a wide range of sectors, e.g. the vehicle and electrical sectors.



High degree of elasticity



The tape moulds to the base material extremely well.

Notice
  • The surface to be sealed must be dry and free of dust and grease.

  • To achieve perfect adhesion and a waterproof seal, wrap the tape tightly around the material to be processed and then overlap.

  • The shrink tape is only UV-resistant in certain cases and should therefore be protected from direct sunlight.

The usage instructions are recommendations based on the tests we have conducted and our experience. Carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to technical changes and product development.

Product information

Würth Elektronik Oy Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Backing material

Polyisobutylene

Colour

Black (base material)

Width

19 mm

Min./max. processing temperature

5 to 35 °C

Elongation at break

600 %

Min./max. temperature resistance

-40 to 90 °C

Ultraviolet resistance

Limited

Moisture resistance

Yes

Length

10 m

Overall thickness

0.5 mm

Dielectric strength

40 kV/mm

Shelf life from production/conditions

36 Month / dry, lying and dust-free storage area, 20°C and 50% humidity

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Elektronik Oy Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information